|
Digital IF
filter, manual notch filter, digital twin PBT and more. The latest
digital features are incorporated in this compact radio from two DSP
chips that deliver superior processing performance. Of course, those
features work on all ham bands, from HF to the 70cm band.
You will never experience AGC pumping from a signal filtered out by the
DSP system. The digital IF filter and manual notch filter are inside the
AGC loop, so you will not encounter AGC blocking. The AGC time constants
are flexibly adjustable from slow, middle, fast (or AGC-off) for each
operating mode.
All the filters you want at your fingertips! You will never have to
purchase “Optional” filters as the IC-7000 has adjustable
digital filters. You just dial in the width you want and select whether
you want a sharp or soft filter shape for SSB and CW modes. Then to
pull-in the the weak ones, with a quick turn of the concentric twin PBT
knobs, you can either narrow the IF passband, or shift the entire
passband to eliminate the QRM.
Pull
out the weak signals in crowded band conditions with Icom’s NEW
two-point MNF (manual notch filter). Apply 70 dB of rejection to two
signals at once! Notch width is adjustable – wide, medium, and narrow –
and an auto-tuning notch filter is available, too.
Noise reduction reduces background noise and improves signal-to-noise
ratio. The noise reduction level is adjustable in 16 steps. It improves
the readability of voice and data signals.
The noise blanker reduces pulse-type noise such as engine ignition and
sparking. The NB level and width (blanking duration) are adjustable in
100 steps.
High power MOS-FET amps supply 35W output power on 430/440MHz band as
well as 100W on HF/50MHz bands and 50W on 144MHz. It provides stable,
high quality output with low IMD and low spurious emissions even during
high duty cycle and extended operation.
The IC-7000 incorporates a high-stability master oscillator, providing
0.5ppm (–0°C to +50°C). A must for data mode operation.
Icom’s original DDS (Direct digital synthesizer) circuit improves the
C/N ratio, providing a clear, clean transmit signal in all bands.
The IC-7000 sheds 20mm (25/32 in) of depth compared with the
IC-706MKIIG. It’s compact body is easy for carrying outdoors or mobile
operation.
Eight of the most-used radio functions such as NB, NR, MNF, and ANF are
controlled by dedicated function keys grouped around the display for
easy visibility. One quick touch turns the function on and off. A longer
touch activates adjustment of the function’s setting.
Record
your callsign, CQ, or other information in 4 transmit playback memories
with alphanumeric labels. A total of 90 seconds is available for the
four memories. A front panel REC control allows you to record incoming
signals for up to 25 minutes (99 channels)*.
The DVR makes portable contesting or mini-expeditions a breeze!
* Up to 120 seconds per channel
The
RTTY demodulator and decoder are built-in. External units and PC are no
longer required for decoding. The twin peak audio filter reduces
interfering signals overlapping the tones and the tuning indicator helps
you zero-in with accurate tuning.
The HM-151 has a 10-keypad for quick channel selection. The triple band
tacking register memorizes the last three frequencies and modes used on
each band. Push the band button once to three times to recall the
channel setting. The F-1 and F-2 buttons are programmable as shortcut
menus of your often used functions.
The 2.5 inch color TFT display presents numbers and indicators in
bright, concentrated colors for easy recognition. You can choose from 3
background colors and 2 font styles to suit your preference, in addition
to a large operating frequency readout. And more, the Video output jack
on the rear panel allows you to view a magnified display on an external
monitor*.
* 3.5(d) mm monaural cable is required for
connection.
The SSB transmit bandwidth is selectable from 100, 200, 300, 500Hz at
the high-pass edge, and 2500, 2700, 2800, 2900Hz at the low-pass edge
respectively. 3 types of high and low combinations can be set in the
quick set mode.
The
band scope function lets you watch conditions around the band and
visually assists in finding other stations. In center mode the band
scope range is centered on the receiving frequency (±10kHz to ±250kHz).
In Fixed mode the band scope sweeps a fixed range.
 The
IC-7000 displays power level, SWR, ALC and compression level of the
speech compressor. The SWR graphic display is useful for tuning
antennas. The measuring step is selectable from 10/50/100/500kHz steps
and the number of measuring steps is adjustable from 3 to 13 steps.
- Front panel separation with optional 3.5m/5m separation cable
- Selectable main dial tension from heavy, light and click
- RF speech compressor controlled by the DSP
- CW full break-in
- CW receive reverse
- CW pitch adjustable
- Tone squelch in FM mode
- 503 memory channels
- Built-in voice synthesizer announces operating frequency, mode and
signal strength
- Duplex mode and automatic repeater function
- Transmit monitor
- DTMF monitor
- 1Hz tuning
- VOX
- CI-V interface
- R
 TX
- RF/SQL knob
- Large speaker
- Auto TS function
- Thermo control silent cooling fan
- Noise squelch and S-meter squelch
- Preamplifier
- Dial lock
- 20dB attenuator
 Top
|
AGC
loop performance controlled by DSP
Digital
IF filters
35W
output in 70cm band
DDS
(Direct digital synthesizer) circuit
User-friendly key allocation
Remote
control microphone, HM-151
